Posts Tagged ‘handspun yarn’
What a stunningly beautiful February day. The sun is shining like crazy and there is snow piled high on tree branches and fence rails. The birds even look happy. They flit about with joy and a spring in their step.
Just 2 more days until Valentines day and the anticipated arrival of our newest little family member. We are just so excited.
I’ve spent the last few weeks on custom work for a few of my customers.
Becky was looking for a luxury baby gift with a difference. We decided on a hand spun Angora and silk handknit baby shrug and matching hat. I call it Whisper. I searched through some of my vintage pattern books and online at vintage knitting site. Inspired by some of the vintage looks and a piece that I did a few years ago I came up with Whisper. The yarn is an amazing mixture of Angora fiber and Silk. They are so different in texture and appearance but come together to make a truly one-of-a-kind yarn with the best of both worlds. The fabric is fluffy and soft with a gorgeous halo but also has the added strength and unmistakable shine of the silk, not to mention the crispy feel that crunches like footsteps on very cold snow. It is tied at the neckline with a delicate pure silk ribbon. The hat is loosely based on a beret style hat from an old SRK pattern that I have loved over the years. It is the sweetest little cardigan and hat set in Marble. I looked for the pattern for days and days and I just couldn’t find it anywhere. Finally a wonderful friend on Ravelry sent me a scanned copy of it and saved the day. I promise we didn’t infringe on any copyrights as I really do own this one, just can’t seem to remember where I put it. The lace edging and the rose are hand crocheted from some very fine 100% handspun silk.
I knit a pair of casual socks for Carolyn. They were to have a casual look and go with her jeans. I am thrilled to report that she was very happy with the resulting socks.
Richard wanted the Turn a Square hat by Jared Flood (one of my own personal favorite designers). This project was a treat to knit and I was finished the first one in just a few days so we decided to knit another one with the colours reversed and it turns out that 2 of these hats can be knit with 2 x 50 gram balls but don’t do any extra rows as I only had about 1 yard left over.
Jamie asked me to spin some camel and silk yarn for her to knit a jacket for her brand new grandson in size 2. Congratulations Jamie and family!
I finally finished the Nube Garter Stitch socks and the Alpacalicious slippers with the leather soles and they have already been gifted.
Love one another
I’ve just added a couple more gift items for baby. I’ve put all of my handspun handknits at really good prices, much lower than I would usually need to ask for a special order. I had a great time knitting these throughout the year and got to do exactly what I wanted and love to do. If I can do that and even recover the price of the yarn I would consider myself a winner and hopefully you would too. That’s what I call a “win win” situation.Sale! Out of stock HandKnit Smocked Baby Sweater in HandSpun Merino Wool & Silk $105.00 $79.00 Read more Sale! Hand Knit Merino Baby Sweater $99.00 $50.00 ADD TO CART Sale! Out of stock Vintage Style Handknit Cashmere Baby Dress $325.00 $252.00 Read more Sale! Out of stock Handspun Handknit Old Shale Lace Layette $157.00 $115.00 Read more
I just put up 3 single skeins of yarn on Etsy. Sometimes when I am spinning for a customer or a personal project I will get the first skein a little fine or a bit too thick for the order or I may have a skein left over from a knitting project. These single skeins will appear as only 1 available but you can always custom order most of the handspun yarns in your choice of yarn weights and hand dyed colours.
To see these skeins on Etsy: special prices availableThe Eastport Alpaca in DK weight and natural snowy white colour, 2.1 oz. 132 yds The New Zealand Merino fleece imported as a raw fleece and washed and hand combed lock by lock, handspun by the worsted method to a very fine lace weight yarn and finally kettle dyed in Garnet. 1.75 oz. 250 yards The lace weight pure Angora Rabbit, the picture says it all 1.1 oz 140 yards
A new design in progress – I guess that would be a DIP, right?
Along with the Custom Fit Sweater for Amy Herzog and her team (beta testing) I’ve been working on a few custom orders and a new designs that I will call Grace after my Mom who just passed away last year at this time. Mom was my mentor, my soul mate, my best friend and the one who taught and inspired me to knit and be creative in so many way. She was also my biggest fan and alway gave me so much encouragement. Well, anyway, the new design is Grace. It will be an elegant but casual cardigan/jacket and will be spectacular for showing off hand dyed and handspun yarns. Super stylish and super easy to knit and fit, you will knit it all from the top down in one piece with no seaming or finishing. I’m including a few “sneak peak” pictures that will give you a feel for the design without giving it away. This sweater allowed me some freedom to play with my dyes, my spinning techniques and let my imagination run free. It is also part of my study in Breed Specific and Rare Breed Wools.
The wool in this garment is Romney. The Romney breed evolved from medieval longwool types. The fibers are long, silky and strong without being prickly. A very good wool to use for durability where you need something sturdy and not overly soft and delicate. My Romney is one of the Canturbury Prize Wool Group imported from New Zealand by Louet Sales. These wools are breed-specific fibers that are handled in such a way as to retain their unique qualities. “Working with Wadsworth Heap Ltd, a fiber supplier in New Zealand, each fleece in this line is grown with passion and great care; each is chosen with a critical eye, scoured in a modern scouring plant, and carded with pride on gentle machinery to maintain the fibre’s integrity and give spinners maximum enjoyment.” So far I have totally enjoyed working with them. If you are interested in having any of these wools custom handspun for a project please just email me. I will get them on the web site eventually, but in the mean time… 😉
They started life as a lesson in preparing and spinning a raw fleece for worsted spun yarn. You can find that post here “Hand Spinning a Worsted Sock Yarn – Slow Cloth” so I though you might like to see the finished product.
I had a bit of difficulty keeping the yarn consistent. This was probably because I was spinning too many other projects at the same time. I do find I can be completely consistent to the point where I can match yards per ounce in skein after skein but this is almost impossible if I am working on more than one project at a time. It seems to be my “crocodile” brain that takes over when I am spinning. I blame the crocodile but perhaps if I took better notes and more complete records I could do a little better?
Here are the pictures of my finished socks. So warm and I am sure they will last a very long time.Stunning Polwarth raw New Zealand wool fleece
I can’t tell you how much enjoyment I am getting out of my new Merino fleece recently imported from Stuart Albrey at Fine Fiber Farms in New Zealand.
According to Margaret Stove The Merino wool of New Zealand is among the finest and highest quality wool fiber to be found anywhere in the world and I second this opinion. The New Zealand climate is just perfect for this particular breed and quality of wool and the sheep can be raised out of door without any coats on and without getting chaff and other veggie matter in the wool. It is super clean, ultra fine and soft and surprisingly white.
Spinning a raw fleece this fine is not like anything I have ever hand spun before and I’ve been spinning for many years. I really had to throw all of my preconceived rules and ideas out the window and just experiment over and over until I got it right. This very fine Merino wool is stretchy and elastic with a great deal of crimp. It is fine to the point of being vulnerable and it needs to be handled very lightly and carefully if you don’t want to stretch or damage the fibers, especially when wet.
A lot of what I learned about spinning this wonder fiber was from the amazing Margaret Stove through a video purchased at Interweave press called “Spinning for Lace “. I also have everything that Deborah Robson (Handspinning Rare Wools ) and Judith MacKenzie ( “Three Bags Full ” or “A Spinners Toolbox“) have published. These ladies have done so much work to share their vast knowledge of wool and spinning with the rest of us and I just thank them so much for all that I have learned from each of them.
Spinning Merino for Lace with Margaret Stove involves working with individual locks of fiber. It is tactile pleasure paradise from moment one and the slow cloth mindset is very necessary. So with a “mind like water” and immersed in the moment I began by separating out these lovely locks, one from another, and laying them out side by side on a piece of cloth in preparation for washing. I actually started my washing with a bit of advise from Margaret Stove. Here is how I washed my first batch. I picked up a single lock and dipped 2/3 of it into very (almost boiling) hot water and then rubbed it vigorously on a bar of soap. Horrors, you say? as I did when I first saw this, but guess what… it works! yes, the lubrication of so much soap seems to keep it from felting together. I then dipped the lock into equally hot rinse water and squeezed, turned it end for end and repeated the process. When I had all of the locks washed and rinsed I rolled them in a towel and squeezes out the excess water. After a surprisingly small amount of time they puffed right up and were dry and ready to comb. The second and all subsequent batches of washing I did a little differently. My method is from Judith MacKenzie and is very close to that taught by Margaret Stove with the addition of heat under the wash pot and a slightly different way of keeping the locks in line so they can’t move around in the wash water. I go into greater detail here and here but I will just say the locks are sorted and laid out side by side on a light cloth (I used a piece of old window curtain this time). the cloth is folded over to keep the locks securely in place. Lots of detergent (I used Tide liquid) and very hot water was added. I then put the pot on the stove top on low for 30 min. The high and constant heat is needed to melt the dense wax and grease found on Merino wool. I let it cool to warm, rolled up the bundles to keep the individual locks from moving and rinsed under the tap with same temperature water. Roll in a towel and squeeze out excess moisture and lay flat to dry.
Combing is “the only way” to prepare this fiber for lace yarn. You really don’t want to go through all of this and end up with something that felts and pills and wears out before your eyes. You want a yarn that will be strong and smooth and careful preparation at every step of the process is a must. Remember your mind like water, be here now, right in this moment doing this work. It is really very pleasant if you don’t try to rush it. So the drum carder will be used for another project at another time. I will confess here and now that since I have started combing I may never need the drum carder again. I love the combs! Some I did on my Louet mini combs and some on my handmade viking combs that I bough on Etsy from BenjaminGreenStudio and I LOVE THEM! To use the big combs I had to break off the tips or brush them out with a dog brush. They are probably a little open for this fine fleece but I got it combed after a few passes and enjoyed every second of it.
At the spinning wheel I tried to follow Margaret’s advise. There was so much to remember and the technique was not exactly what I was used to but I tried to keep the tension of the fiber as I drafted so that the twist would go in with the fiber crimp stretched out. If the crimp is flattened when the twist goes in the yarn will always be trying to regain the crimp and your yarn is springy and elastic. I guess she must have mentioned not to stretch it, just a gently tension, but of course I did stretch it and the first skein I made was just coiling and unruly like a curly boucle.
One of my problems was the stretching but another one was twist. You cannot just ply this lovely fine fiber back to balanced by checking it in the usual way. The twist has “set” in the singles even if it has only been sitting on the bobbin for a few hours. If you put some ply twist in and check this yarn by letting a bit hang between your hand and the orifice you will find it will look balanced but will actually not have nearly enough ply twist in the yarn. You will have to put in enough twist to make a 45 degree angle and you will find it balances only after washing. Handle the singles very very carefully as you ply and do not stretch or your yarn will be unbalanced and unruly. Ask me how I know?
I’m knitting the Queen Sylvia Shawl by Nancy Bush from Knitted Lace of Estonia.
Next in this project: Managing Color in a Raw Fleece
I spun this yarn for a customer in DK (3 Light) weight from some lovely moorit or brown shetland wool. It was spun from a combed preparation and I pulled off several staple lengths and held them folded over my finger. Spinning from the fold with a long draw and a very light touch, gave me a wonderfully airy and bouncy yarn that is not too fuzzy. I think it’s the best way to spin this wool for knitting. It will last a very long time, it is more consistant and will show the stitch definition much better than a true woolen yarn but has all of the bounce and airy lightness of a woolen yarn. This method will also keep the wool from pilling as much … if at all. While the wool of the Shetland Sheep is not as “next to the skin” soft as the Merino and others like Polwarth and Corriedale, many wool lovers not only like to wear Shetland wool but prefer it to it’s softer and less robust peers. Many use the finer Shetland for next to the skin wear and even for baby things.
The Shetland is a small sheep originating in the Shetland Isles. When the Rare Breeds Survival Trust was set up in the 1970′s The Shetland was considered a Rare Breed and was listed with them as Category 2 – Endangered. Since that time the Shetland has become more popular with many smaller farms and has graduated to Category 6 – Other Native Breeds. This is excellent news for us as spinners. The Shetland produces a variety of characteristics in it’s wool from the superfine wool from around the neck area that is chosen for Shetland lace shawls to the sturdier wool for use in garments that are made to last for many years. Shetland sheep are also very well know for the variety of shades and natural colours in which their fleece will grow. The Shetland sheep is hardy, adaptable and long-lived. Their wool has been used, traditionally, in fine shawls and Fair Isle knitting patterns.
Order Custom Handspun Shetland Wool in your choice of yarn weights. Design it yourself hand spun Shetland wool yarn
Meredith has just sent me a few pictures of the sweater vest she created with the last of the Mango Merino Wool and Silk that I spun up into a yarn for her.
She’s amazing. When I spin for Meredith she doesn’t ask for yardage or WPI and I don’t have to match a gauge. She lets the yarn do the talking and doesn’t even decide what it will be until she’s had it in her hands for a while. This is creative freedom at it’s best.
Meredith has also generously sent me a testimony for our testimonials section.
Here’s what she says about the yarn and a few pictures. Thanks Meredith 🙂
” I ordered the merino wool and silk in “mango” and the baby camel and silk custom made yarns from Nancy Elizabeth Designs. Never having used hand-spun yarn, when it arrived the color and texture took my breath away. As an intuitive knitter, I let the yarn carry my thoughts and garment design and was excited by the results. For an unschooled knitter, this extraordinarily high quality yarn allowed me to a one-of-a-kind artsy original to suit my taste.”Gaywool Colourful Merino and Silk Yarn
A few months ago I shared the pattern for the Hat my guys like and now here is the sweater that falls into that same category. With lots of input from DH, the eventual wearer of this pullover, I designed another sweater to match the one I knit him almost 30 years ago. Not only did the original sweater last for 30 years, but hardly a day went by that it was not called into service (except those hot summer days, of course) and it’s still all in one piece even if it is showing a little wear now.
As you can imagine, I’ve knit him a few sweaters over the years and some he wears a little and some he wears a lot. This is the one he hardly ever takes off! When the boys come in and see his newest sweater they want one too. I’m going to have lots of opportunity to knit this one in several sizes and variations and will keep you posted.
Here is the story of spinning the yarn for Jacob from a Jacob fleece and another short post with a few more pictures. Pattern coming asap. I will have to knit it at least one more time as I want to show the body with a simple rib instead of the colour variegation.
I haven’t posted in March because I’ve just been too busy spinning my custom orders. This month required another wheel so we got out the S90 and dusted it off. It didn’t even need a tune up but it got a new drive band just because…
I’m reminded why I got this wheel in the first place and I really enjoyed spinning with it this month. I’ve been spinning everything on the smaller S45 recently. I switch over to the little S45 from the larger S90 because the S45 has Scotch tension and I can spin a yarn as fine and delicate as I wish with no drag or pull from the wheel. It’s perfect for spinning lace weight yarns in any fiber but it’s pretty much mandatory to have feather light tension when spinning the fine luxury fibers from Merino wool to Cashmere.
I got out the S90 this time because I wanted to spin 3 ply and I really like the lazy kate on this wheel. The S90 comes with 4 bobbins and a 3 bobbin lazy kate which is just what I needed. It’s built in and can be swung out to the side, with or without brake, right in line with where I want to pull from. I found the pull / tension of the traditional Louet drive set up somewhat difficult to deal with after having been used to the scotch tension. I tried everything I could think of to get it to lessen the pull onto the bobbin. As you can see from the picture I don’t even use the leather tension strap. I might if I was spinning a very bulky yarn or something thick and artsy but mostly I don’t even have it on at all. I don’t like to lubricate the brass cup that holds the orifice end of the flyer because it will produce a black gunk that is too close to my lovely yarn for my taste. I ended up padding the bobbin and threading the yarn through both of the flyer hooks. First over one side and then through the eye on the opposite arm of the flyer. It was probably a bit more abrasive to the yarn but the resistance caused by the yarn crossing over the bobbin of already spun yarn was just enough to lessen the pull and I was able to spin the yarn just exactly how I intended.Highlights: A few of the Orders
For Breed Specific and Rare wools I had a commission the spin some Shetland Wool for a customer who is knitting Ranger by Jared Flood. I was challenged to spin a yarn that would give my customer the correct gauge, body and drape for the design. The yarn used by the designer for this project is “Shelter”. First, I spent a few days of experimenting with small differences in the spinning technique and swatching, until I was able to spin a yarn that would behave just how I wanted for this design. Of course the choice of fiber was of paramount importance to this end and the Shetland wool was perfect. I see this cardigan needing a yarn with some body, not too soft and limp. It also needs to be bouncy and robust without being too scratchy at the neck and wrists. I worked a few more swatches to be sure I could get the gauge right and I had a plan 🙂 They love it! Some Ontario Alpaca
For Kerstin at Alpaca Avenue – ladyolivia on Etsy. I had the opportunity to spin some of Viola (fawn) and Lily( White), 100% pure Fine Ontario Alpaca fiber. It was heavenly. I did a 3 ply this time to make it thick enough to knit as a worsted weight. The fiber is so lovely and fine it kept wanting to be fingering weight 🙂 but with 3 plies it works beautifully. Kerstin has already knit these super mitts.
We are also working on a project in Eastport Alpaca. I’ve spun some fingering weight yarn for Kerstin to knit Winterberry Hood by Carina Spencer. This yarn is a 2 ply and is also hand painted in shades of Garnet from the Gaywool dye collection of colours.